Icom VHF Digital/Analog Handheld Transceivers - IC-F3261DT/DS



Authorized Dealer Price Match Guarantee
Price Match Guarantee
Sound Advice B2B offers a price match guarantee for lower priced items on identical in-stock items from competing authorized dealers. Exclusions Apply*.



Availability
Schedule Delivery

Select a Model

Fully Featured IDAS™ Digital Handheld with Built-in GPS and Waterproof Protection

IP67 Dust-tight & Waterproof Protection

The IC-F3261D series provides rugged protection against dust and water that is equivalent to IP67. The radio can withstand 1m depth of water for 30 minutes.

Man Down and Lone Worker Functions for Emergency Call

The man down function* automatically sends an emergency signal when the transceiver is left in a horizontal position. The lone worker function also can transmit an emergency signal when the radio is not operated for a preset period. These emergency signals can be sent with GPS position data* to alert your co-workers or dispatcher to any potential trouble.

800mW (typ.) Audio Output Power

The built-in BTL amplifier doubles the audio output power and the large 40mm speaker delivers loud 800mW (typ.) audio to receive all calls under noisy environments.

Built-in GPS Receiver*

Your current position data can be attached to a voice or data (SDM, status or emergency signal) transmission and can be sent to dispatch stations*.

14-pin Accessory Connector

The new 14-pin accessory connector enhances audio output capabilities with the built-in BTL amplifier. The optional HM-184 speaker - microphone provides a 1000mW (typ.) audio output for loud and clear communication.

Large Full Dot-matrix LCD

Using a large full dot-matrix LCD (32 × 18mm), the IC-F3261D series shows two lines of easy to read text messages. The bottom row shows assigned functions to the [P0] to [P3] buttons.

Long Lasting Battery Life

IDAS™ Features

The IC-F3261D series provides NXDN™ CAI-based IDAS digital mode operation. It is also compatible with NXDN™ Type-D multisite trunking. The following IDAS features are programmable.

  • Individual/group call
  • Individual ID and talkgroup ID memories
  • Status message
  • SDM (Short Data Message)
  • GPS
  • Stun, kill and revive
  • Radio check
  • Remote monitor
  • Call alert
  • Call log
  • Emergency
  • Digital voice scrambler
  • Block decode
  • RAN (Radio Access Number)

Built-in 2-Tone and 5-Tone*

2-Tone and 5-Tone signalings give you selective calling, quiet stand-by and other convenient functions. The radio stun and kill functions disable a radio over the air and the revive function restores the stunned radio.

MDC 1200 Compatible*

The built-in MDC signaling provides the following selective calling and ANI features.

  • PTT ID
  • SelCall
  • Radio check
  • Radio stun/revive
  • 500 aliases
  • Status message/request
  • Call alert
  • Emergency, emergency mic monitoring

Scan Features

The IC-F3261D series can detect both analog and IDAS conventional signals and automatically selects the transmission mode to reply to the received call.

Built-in Voice Scrambler

The built-in inversion voice scrambler* provides secure conversation in analog mode. When using IDAS digital mode, the digital voice scrambler provides a 15-bit key (about 32,000 codes) as standard.

Other features

  • 512 memory channels with 128 zones
  • 5W output power both in VHF and UHF
  • Basic LTR™ mode operation*
  • CTCSS/DTCS encoder/decoder*
  • MIL-STD 810 G rugged construction
  • 8 DTMF autodial memories
  • Tactical group function
  • Busy channel lockout, repeater lockout
  • Power on password
  • Time-out timer
  • Talk around function
  • Low battery alert
  • Escalating alarm
  • Surveillance function

Supplied accessories (May differ according to version)

  • Battery pack, BP-232WP
  • Belt clip, MB-94R
  • Antenna

General

 

IC-F3261DT/DS

IC-F4261DT/DS

Frequency coverage
136–174 MHz
400–470 MHz
450–512 MHz
Number of channels
512 channels/128 zones
Channel spacing
12.5/6.25kHz
Type of emission
11K0F3E/4K00F1E/F1D
Current drain
(approx.)
Tx High (at 5W)
1.7A
1.8A
Rx Rated output
550mA
Standby
160mA
Dimensions (W×H×D)
(projections not included)

53.5×142.7×39.5 mm;
2.11×5.62×1.56 in
(With BP-232WP)

Weight (approx.)

400g; 14.1oz
(With BP-232WP, MB-94R & FA-SC57U)

TRANSMITTER

 

IC-F3261DT/DS

IC-F4261DT/DS

RF output power (at 7.5V DC)
5W, 2W, 1W
(Hi, L2, L1)
Spurious emissions
78dB typ.
Frequency stability
±1.0ppm
Audio harmonic distortion
1.5% typ. (AF 1kHz 40% deviation)
FM Hum and Noise
43dB typ. (Narrow)
40dB typ. (Narrow)
FSK error
2.0% typ.

RECEIVER

 

IC-F3261DT/DS

IC-F4261DT/DS

Sensitivity Analog
0.23μV typ. (at 12dB SINAD)
Digital
0.20μV typ. (at 5% BER)
Adjacent channel selectivity
68/60dB typ. (Narrow, digital)
Spurious response rejection
76dB typ.
Intermodulation rejection
75/66dB typ. (Narrow, digital)
AF output power
(at 5% distortion)
800mW typ. (Internal SP, 12Ω load)
1000mW typ. (External SP, 8Ω load)

GPS (Depending on version)

 

IC-F3261DT/DS

IC-F4261DT/DS

Receiver channels
12 channels
Time to first fix (cold start)
36 seconds typ. (at open sky)
Horizontal accuracy
5m (at open sky)
Standard MIL-810 G
Method, Proc.
Low Pressure Storage
500.5 I
Low Pressure Operation
500.5 II
High Temperature Storage
501.5 I
High Temperature Operation
501.5 II
Low Temperature Storage
502.5 I
Low Temperature Operation
502.5 II
Temperature Shock
503.5 I-C
Solar Radiation
505.5 I
Rain Blowing
506.5 I
Rain Drip
506.5 III
Humidity Induced
507.5 II
Salt Fog
509.5
Dust Blowing
510.5 I
Vibration
514.6 I
Shock Functional
516.6 I
Shock Transit Drop
516.6 IV
Ingress Protection Standards (IC-F3261D/F4261D, BP-232WP and HM-184)
Dust & Water
IP67 (Dust-tight and waterproof protection)


Save a Bundle