Affordable, high performance radio that offers abundant features
Simple operation for instant communication
The IC-F3003 series is so easy to use there's no special training required. The few knobs and buttons are generously sized for easy operation and are designed to provide non-slip, positive action – even while wearing gloves.
Easy to hear in noisy areas
The built-in bridge-tied load (BTL) amplifier offers powerful 800mW* audio output from the large 45mm speaker. The radio delivers loud and intelligible audio even in noisy environments. * Typical with internal speaker
Longer operating time
A new high efficiency FET of the IC-F3003 series reduces consumption current and provides 20 hours* of operating time with the BP-265, 2000 mAh (typ.) battery pack. Even when used with the BP-264, the radio offers 14 hours* of operating time. *Tx:Rx:Standby=5:5:90. Power save function ON.
Weather resistant, dust protection, military rugged
While the radio is a compact unit with a height of only 111mm, the radio is tested to dust protection and water resistant equivalent to IP54 and 11 categories of MILSTD- 810 environmental test. In short, the IC-F3003 series is built rugged!
Internal VOX capability for hands-free operation
The radio has the internal VOX capability for hands-free operation. Optional compatible headset with plug adapter cable OPC-2004LA can be used with the radio. Also, the VOX gain and VOX delay time are adjustable.
Selective calling, quiet stand-by and more
2-Tone and 5-Tone signalings give you selective calling, quiet stand-by and other convenient functions with programming. The radio “stun” function disables a radio over the air and the “revive” function restores the stunned radio.
Scan features
The priority scan allows you to monitor one or two priority channels while scanning other non-priority channels. The Tx channel and talk back functions allow you to make a quick response while scanning.
Other features
General
IC-F3003 |
IC-F4003 |
|||
---|---|---|---|---|
Frequency range (Varies according to version) |
136MHz–174MHz
|
350MHz–400MHz
400MHz–470MHz 450MHz–520MHz |
||
Number of memory channels |
16 channels
|
|||
Channel spacing (Varies according to version) |
12.5kHz/25kHz
|
|||
Type of emission |
16K0F3E/11K0F3E
|
|||
Current drain | Tx |
1.3A
|
||
Rx | Stand-by |
75mA
|
70mA
|
|
Max. audio |
330mA (Internal SP)
|
|||
Dimensions (W×H×D) (Projections are not included) |
58×111×31 mm (With BP-264)
58×111×35.5 mm(With BP-265) |
|||
Weight |
330g (With BP-264)
270g (With BP-265) |
Transmitter
IC-F3003 |
IC-F4003 |
|
---|---|---|
RF output power (at 7.2V DC)) |
5W, 2W, 1W
(Hi, L2, L1) |
4W, 2W, 1W
(Hi, L2, L1) |
Spurious emissions |
70dB (min.)
|
|
Frequency stability |
±2.5ppm
|
|
Audio harmonic distortion (W/N) |
1.0%/1.5% (typ.)
|
|
FM Hum and Noise (W/N) |
46dB/40dB (typ.)
|
Receiver
IC-F3003 |
IC-F4003 |
||
---|---|---|---|
Sensitivity at 12dB SINAD |
0.25dBμV (typ.)
|
||
Adjacent channel selectivity (W/M/N) |
78dB/70dB (typ.)
|
73dB/65dB (typ.)
|
|
Spurious response rejection |
70dB (min.)
|
||
Intermodulation rejection |
75dB (typ.)
|
74dB (typ.)
|
|
AF output power (at 5% distortion ) |
Internal SP (With 12Ω load) |
800mW (typ.)
|
|
External SP (With 8Ω load) |
400mW (typ.)
|
Standard |
MIL-810 F
Method, Proc. |
---|---|
Low Pressure Storage |
500.4 I
|
Low Pressure Operation |
500.4 II
|
High Temperature Storage |
501.4 I
|
High Temperature Operation |
501.4 II
|
Low Temperature Storage |
502.4 I
|
Low Temperature Operation |
502.4 II
|
Temperature Shock |
503.4 I
|
Solar Radiation |
505.4 I
|
Rain Blowing |
506.4 I
|
Rain Drip |
506.4 III
|
Humidity Induced |
507.4
|
Salt Fog |
509.4
|
Dust Blowing |
510.4 I
|
Vibration |
514.5 I
|
Shock Functional |
516.5 I
|
Shock Transit Drop |
516.5 IV
|
Dust & Water |
IP54 (Dust-protection and water resistant)
|
---|